联系我们CONTACT US

保定嘉森断桥铝型材销售中心

联系人:马女士

手机:15530226000

地址:保定市西三环与天威路交叉口南行200米路西1656号

行业新闻
检查门窗的安装质量几种方法
检查门窗的安装质量几种方法
Several Methods of Inspecting the Installation Quality of Doors and Windows
1.窗户表面:窗框要洁净、平整、光滑、大面无划痕、碰伤,型材无开焊断裂。   2.五金件:五金件要齐全,位置正确,安装牢固,使用灵活,能达到各自的使用功能。   3.玻璃密封条:密封条与玻璃及玻璃槽口的接触应平整,不得卷边、脱槽。   4.密封质量:门窗半闭时,扇与框之间无明显缝隙,密封面上的密封条应处于压缩状态。   5.玻璃:玻璃应平整、安装牢固,不应有松动现象,单层玻璃不得直接接触型材,双层玻璃内外表面均应洁净,玻璃夹层内不得有灰尘和水汽,隔条不能翘起。   6.压条:带密封条的压条必须与玻璃全部贴紧,压条与型材的接缝处应无明显缝隙,接头缝隙应小于或等于1毫米。   7.拼樘料:拼樘料应与窗框连接紧密,同时用嵌缝膏密封,不得晃动,螺钉间距应小于或等于600毫米,内衬增强型钢两端均应与洞口固定牢靠。   8.开关部件:平开、推拉或旋转窗均应关闭严密。   9.框与墙体连接:窗框应横平竖直、高低一致,固定片的间距应小于或等于600毫米,框与墙体应连接牢固,缝隙应用弹性材料填嵌饱满,表面缝膏密封,无裂缝。   10.排水孔:排水孔位置要正确,同时还要通畅。
1. Window Surface: The window frame should be clean, flat, smooth, large surface without scratches, bruises, profiles without open-weld fracture. 2. Hardware: Hardware should be complete, positioned correctly, firmly installed, flexible to use, to achieve their respective use functions. 3. Glass sealing strip: The contact between the sealing strip and the glass and glass grooves should be smooth, and no edge rolling or grooving should be allowed. 4. Sealing quality: When the doors and windows are half closed, there is no obvious gap between the fan and the frame, and the sealing strip on the sealing surface should be in a compressed state. 5. Glass: Glass should be flat, firmly installed, no loosening, single-layer glass should not contact profiles directly, double-layer glass should be clean inside and outside, there should be no dust and water vapor in the glass sandwich, and the partition should not be raised. 6. Press strip: Press strip with sealing strip must be tightly adhered to glass. There should be no obvious gap between press strip and profile. Joint gap should be less than or equal to 1 mm. 7. Material for diaphragm assembling: Material for diaphragm assembling should be tightly connected with window frame, sealed with seam paste, not to shake, screw spacing should be less than or equal to 600 mm, and both ends of lined reinforced section steel should be firmly fixed with the opening. 8. Switching components: flat open, push-pull or rotating windows should be closed tightly. 9. Connection between frame and wall: The window frame should be horizontal and vertical, the height should be the same, the distance between fixing pieces should be less than or equal to 600 mm, the frame and wall should be firmly connected, the gap should be filled with elastic materials, the surface seam paste sealed, no cracks. 10. Drainage holes: Drainage holes should be located correctly and at the same time should be unblocked.
  1. 联系人:马女士  传真:0312-3177857
  2. 办公电话:0312-3176386  手机:15530226000
  3. 400电话:400-0312-989
  4. 网址:www.jiasenmenchuang.com
  5. 地址:保定市西三环与天威路交叉口南行200米路西1656号

版权 © 保定嘉森断桥铝型材销售中心  网站制作:保定遨游公司